G3GM
Would you like to react to this message? Create an account in a few clicks or log in to continue.

G3GM 1973 to 1977 A-bodys. Chevelles, Monte Carlos, El Caminos, Laguna, 442, Cutlass, Malibu, GTO, LeMans, Century, Regal, Grand Am, Grand Prix, Sprint, Gran Sport, Can Am, Hurst-olds, and other 73-77 A-bodies


Aluminum Wheels

+5
dynchel
77mali
1973 454 MONTE
chevellelaguna
Brainstain
9 posters

G3GM :: G3 Tech :: Body

Page 1 of 2 • 1, 2  Next

Go down

Aluminum Wheels Empty Aluminum Wheels

Post by Dinomyte Thu May 29, 2014 8:46 am

Been working on this set of early '80's Camaro rims.  I figured I'd post some pics see what others had to say or add.  Not to mention I knew if there was a thread it would be more motivation to get it done than to put it off.

I picked these up about 2 years ago, and have just started sanding them down.  They were gold and looked great but hadn't been clear coated so not as much work as it could have been.

Aluminum Wheels Dsc02210

I've got two of the four done, will be painting them glossy black, and then sand down the flats so they look like they do now, and some rattle can two part clear after that. Chrome lug nuts, and I just need to find an emblem for the centre that doesn't say "Z/28" on it. (Any ideas?)

I've got a 255/65/15 BFG Radial T/A's for the front and 255/70/15 for the rear.

Dinomyte
Dinomyte
Donating Member
Donating Member

Street Cred : 11

Back to top Go down

Aluminum Wheels Empty Re: Aluminum Wheels

Post by Brainstain Thu May 29, 2014 10:04 am

Maybe sand the cap down and paint it black?

Brainstain
Donating Member
Donating Member

Street Cred : 8

Back to top Go down

Aluminum Wheels Empty Re: Aluminum Wheels

Post by driveit Thu May 29, 2014 11:45 am

I wonder how vinyl would hold up on a center cap? What is the diameter of the cap?
driveit
driveit
Donating Member
Donating Member

Street Cred : 15

Back to top Go down

Aluminum Wheels Empty Re: Aluminum Wheels

Post by Dinomyte Thu May 29, 2014 11:56 am

Thanks

I was hoping for a place to purchase the centre emblem, they come off, and it's just a peel and stick type thing. I'll take a picture.

I was thinking just a Chevy logo would be fine. I've seen them before at a swap meet.

Dinomyte
Dinomyte
Donating Member
Donating Member

Street Cred : 11

Back to top Go down

Aluminum Wheels Empty Re: Aluminum Wheels

Post by driveit Thu May 29, 2014 12:19 pm

I was gonna throw something together for ya. If you can't find what you are looking for shoot me a pm and I will see what I can do.
driveit
driveit
Donating Member
Donating Member

Street Cred : 15

Back to top Go down

Aluminum Wheels Empty Re: Aluminum Wheels

Post by Limey SE Thu May 29, 2014 1:18 pm

A lot of different options to apply over the Camaro emblem

http://www.ebay.com/sch/i.html?_nkw=chevy+center+cap+decal
Limey SE
Limey SE
Management
Management

Street Cred : 97

Back to top Go down

Aluminum Wheels Empty Re: Aluminum Wheels

Post by Limey SE Thu May 29, 2014 1:21 pm

Dinomyte wrote:Thanks

I was hoping for a place to purchase the centre emblem, they come off, and it's just a peel and stick type thing.  I'll take a picture.  

I was thinking just a Chevy logo would be fine.  I've seen them before at a swap meet.


http://www.ebay.com/itm/2010-2013-CHEVROLET-CAMARO-STICKERS-CENTER-CAP-DECALS-Fits-Camaro-/251539124434?pt=Motors_Car_Truck_Parts_Accessories&hash=item3a90e670d2&vxp=mtr
Aluminum Wheels !BjMSfegBWk~$(KGrHqYH-CQEsMKuO7JLBLSim5Zc!w~~_12


http://www.ebay.com/itm/CHEVY-Wheel-Rim-Decals-Center-Cap-Rims-Overlay-Decal-Stickers-BLACK-GREY-Vinyl/221435306897?_trksid=p2047675.c100005.m1851&_trkparms=aid%3D222008%26algo%3DSIC.MOTORS%26ao%3D1%26asc%3D20131003132420%26meid%3D7246256567856321474%26pid%3D100005%26prg%3D20131003132420%26rk%3D2%26rkt%3D6%26sd%3D251539124434&rt=nc
Aluminum Wheels $T2eC16J,!)!E9s2fB(IIBRJlhI6bkg~~60_12
Limey SE
Limey SE
Management
Management

Street Cred : 97

Back to top Go down

Aluminum Wheels Empty Re: Aluminum Wheels

Post by Dinomyte Thu May 29, 2014 3:27 pm

Limey wrote:
Dinomyte wrote:Thanks

I was hoping for a place to purchase the centre emblem, they come off, and it's just a peel and stick type thing.  I'll take a picture.  

I was thinking just a Chevy logo would be fine.  I've seen them before at a swap meet.


http://www.ebay.com/itm/2010-2013-CHEVROLET-CAMARO-STICKERS-CENTER-CAP-DECALS-Fits-Camaro-/251539124434?pt=Motors_Car_Truck_Parts_Accessories&hash=item3a90e670d2&vxp=mtr
Aluminum Wheels !BjMSfegBWk~$(KGrHqYH-CQEsMKuO7JLBLSim5Zc!w~~_12

Thanks Limey - that's the one.  I still need to check with the local guys who do Camaro stuff and such as that's usually the easiest way to get this kind of thing.  Not such a big deal to spend $5 more, but make it as easy as drive across town.

Driveit - thanks for the offer. If things don't come together I'll let you know.


Last edited by Dinomyte on Thu May 29, 2014 3:33 pm; edited 1 time in total (Reason for editing : for got Driveit)
Dinomyte
Dinomyte
Donating Member
Donating Member

Street Cred : 11

Back to top Go down

Aluminum Wheels Empty Re: Aluminum Wheels

Post by driveit Thu May 29, 2014 3:58 pm

No prob.
driveit
driveit
Donating Member
Donating Member

Street Cred : 15

Back to top Go down

Aluminum Wheels Empty Re: Aluminum Wheels

Post by chevellelaguna Thu May 29, 2014 4:01 pm

I made a set of billet aluminum plugs for my 16" iroc rims, but you need access to a lathe or someone in a machine shop. Wouldn't be expensive to make four of em.
chevellelaguna
chevellelaguna
G3GM Enthusiast
G3GM Enthusiast

Street Cred : 16

Back to top Go down

Aluminum Wheels Empty Re: Aluminum Wheels

Post by 1973 454 MONTE Thu May 29, 2014 6:47 pm

becarefull. offset might put them to close to the tierods or frame.
1973 454 MONTE
1973 454 MONTE
Donating Member
Donating Member

Street Cred : 36

Back to top Go down

Aluminum Wheels Empty Re: Aluminum Wheels

Post by dynchel Thu May 29, 2014 9:34 pm

Dinomyte wrote:Been working on this set of early '80's Camaro rims.  I figured I'd post some pics see what others had to say or add.  Not to mention I knew if there was a thread it would be more motivation to get it done than to put it off.

I picked these up about 2 years ago, and have just started sanding them down.  They were gold and looked great but hadn't been clear coated so not as much work as it could have been.

Aluminum Wheels Dsc02210

I've got two of the four done, will be painting them glossy black, and then sand down the flats so they look like they do now, and some rattle can two part clear after that.  Chrome lug nuts, and I just need to find an emblem for the centre that doesn't say "Z/28" on it. (Any ideas?)

I've got a 255/65/15 BFG Radial T/A's for the front and 255/70/15 for the rear.

Crossed corvette flags would be cool.
dynchel
dynchel
Donating Member
Donating Member

Street Cred : 40

Back to top Go down

Aluminum Wheels Empty Re: Aluminum Wheels

Post by chevellelaguna Thu May 29, 2014 9:53 pm

Those will fit , I ran those 15" irocs decades ago, no issue.
chevellelaguna
chevellelaguna
G3GM Enthusiast
G3GM Enthusiast

Street Cred : 16

Back to top Go down

Aluminum Wheels Empty Re: Aluminum Wheels

Post by Dinomyte Thu May 29, 2014 10:24 pm

I've already tried the rims on the car without tires and they clear everything up front, and out back too.

Corvette flags now that's an idea Smile

I've got number 3 sanded down, here's what they're looking like.

Aluminum Wheels <a href=Aluminum Wheels Dsc02211" />

This is current centre, and what the emblem in the middle looks like

Aluminum Wheels <a href=Aluminum Wheels Dsc02212" />

The emblems are 2 1/4 " and the cap's got pegs, and clips to hold it in place.


Last edited by Dinomyte on Thu May 29, 2014 10:29 pm; edited 1 time in total (Reason for editing : missed click)
Dinomyte
Dinomyte
Donating Member
Donating Member

Street Cred : 11

Back to top Go down

Aluminum Wheels Empty Re: Aluminum Wheels

Post by chevellelaguna Thu May 29, 2014 10:45 pm

That's looking sharp so far. I like the corvette flag idea. The plugs I made were a little tight and hammered right in with a couple taps of a hammer and a block of wood. I would paint the caps you have and attach the corvette flags to em
chevellelaguna
chevellelaguna
G3GM Enthusiast
G3GM Enthusiast

Street Cred : 16

Back to top Go down

Aluminum Wheels Empty Re: Aluminum Wheels

Post by dynchel Thu May 29, 2014 10:51 pm

You can buy a set of corvette flag emblems on eBay for pretty cheap.  They were one of my choices, but I chose something else.
dynchel
dynchel
Donating Member
Donating Member

Street Cred : 40

Back to top Go down

Aluminum Wheels Empty Re: Aluminum Wheels

Post by 1973 454 MONTE Fri May 30, 2014 11:07 am

sorry to put in my 0.02 about fitment. ive always thought they had a wider inner offset than say a stock rally.

these might fit
http://www.ebay.com/itm/Corvette-Camaro-Flags-wheel-Center-Cap-stickers-decals-4-58mm-2-3in-diameter-/151171213883?pt=Motors_Car_Truck_Parts_Accessories&hash=item233281aa3b&vxp=mtr

they look like what i have on my corvette aluminums.
Aluminum Wheels Vette110

i also have the horn button to match.
Aluminum Wheels Vette210
1973 454 MONTE
1973 454 MONTE
Donating Member
Donating Member

Street Cred : 36

Back to top Go down

Aluminum Wheels Empty Re: Aluminum Wheels

Post by Dinomyte Tue Jun 24, 2014 4:35 pm

Suggestions please.

I'm now at the point where I've painted the wheels all black and "trying" to sand down all the flats.

I've put down 4 or 5 coats of rattle can black paint.  It looks really good.

The issue is I'd decided not to mask as I didn't feel I could cut a circle easily, not to mention any sort of wobble in the taping would look really bad.  So the plan was to sand down all the flats, I've tried

180 sand paper
400 paper
green zip wheels

it's very very slow going.

The best results have been with the 180 and the 400 paper, but it took 45 minutes to get one spoke and part of the edge done. At that rate it'll be Christmas before I'm done.
Dinomyte
Dinomyte
Donating Member
Donating Member

Street Cred : 11

Back to top Go down

Aluminum Wheels Empty Re: Aluminum Wheels

Post by dynchel Tue Jun 24, 2014 4:41 pm

Try wet sanding, (if you arent already) starting with 400 grit and working up (in grits)  till the scratches are gone. This is how I did my m/t valve covers,  Then polish I like mothers mag polish the best.


Last edited by dynchel on Tue Jun 24, 2014 4:53 pm; edited 1 time in total (Reason for editing : added details)
dynchel
dynchel
Donating Member
Donating Member

Street Cred : 40

Back to top Go down

Aluminum Wheels Empty Re: Aluminum Wheels

Post by dynchel Tue Jun 24, 2014 4:44 pm

If that doesn't work, try wiping the spokes with reducer to soften up the paint some.
dynchel
dynchel
Donating Member
Donating Member

Street Cred : 40

Back to top Go down

Aluminum Wheels Empty Re: Aluminum Wheels

Post by driveit Tue Jun 24, 2014 5:08 pm

You could try a da sander, but I would be careful and make sure to keep it flat. Might want to try it on something else first so you know how it reacts if you have never used one.
driveit
driveit
Donating Member
Donating Member

Street Cred : 15

Back to top Go down

Aluminum Wheels Empty Re: Aluminum Wheels

Post by Dinomyte Tue Jun 24, 2014 9:23 pm

driveit - a zip wheel is just like a da sander, except it's about 1.5" - 2" in diameter, and usually I put it in an 90 degree angle grinder, you could put it in your drill if you don't have an angle grinder.  The smaller disk is much easier to handle.

Aluminum Wheels Scotch10
Dinomyte
Dinomyte
Donating Member
Donating Member

Street Cred : 11

Back to top Go down

Aluminum Wheels Empty Re: Aluminum Wheels

Post by driveit Wed Jun 25, 2014 9:14 am

So you are already using that then? If so all I can say is keep up the long and tedious work.
driveit
driveit
Donating Member
Donating Member

Street Cred : 15

Back to top Go down

Aluminum Wheels Empty Re: Aluminum Wheels

Post by Dinomyte Wed Jun 25, 2014 1:41 pm

LOL . . .
Dinomyte
Dinomyte
Donating Member
Donating Member

Street Cred : 11

Back to top Go down

Aluminum Wheels Empty Re: Aluminum Wheels

Post by dynchel Wed Jun 25, 2014 1:53 pm

What the hell kind of paint did you use?
dynchel
dynchel
Donating Member
Donating Member

Street Cred : 40

Back to top Go down

Aluminum Wheels Empty Re: Aluminum Wheels

Post by Sponsored content


Sponsored content


Back to top Go down

Page 1 of 2 • 1, 2  Next

Back to top

- Similar topics

G3GM :: G3 Tech :: Body

 
Permissions in this forum:
You cannot reply to topics in this forum