Kerplunk...
+3
jerry46765
The Dude
JB2wheeler
7 posters
G3GM :: Off Topic :: Close Cousins
Page 1 of 1
Kerplunk...
For those of you who have switched to, or are thinking about a 9C1/Imp SS rear end...
This is what they look like if they come apart.
Sorry for the crappy phone pic, but if you look close, you can see one gear in two pieces, and the other with several missing teeth.
All fixed and back on the road, but I had an interesting day or two this week.
This is what they look like if they come apart.
Sorry for the crappy phone pic, but if you look close, you can see one gear in two pieces, and the other with several missing teeth.
All fixed and back on the road, but I had an interesting day or two this week.
Roadcaptain S3- Donating Member
- Street Cred : 26
Re: Kerplunk...
Hmmm...you must have driven the Impala pretty hard, yes? JB
JB2wheeler- G3GM Fanatic
- Street Cred : 28
Re: Kerplunk...
Negative, Just cruising along on New Cut @ Outer Loop Friday. About 45 mph and PHOOEEY!
I'm quite sure the guy I bought it from last year rode it pretty hard before his Dad took it back from him.
The rear end was the only thing left that the dad hadn't rebuilt.
I'm quite sure the guy I bought it from last year rode it pretty hard before his Dad took it back from him.
The rear end was the only thing left that the dad hadn't rebuilt.
Roadcaptain S3- Donating Member
- Street Cred : 26
Re: Kerplunk...
I take it you had the Gov-lock rear? Been there before too. Coming home in my truck & all of the sudden I heard a whining noise. Before I could slow down to a stop.... KABOOOOM! It shattered everything inside & blew some pieces through the front of the diff rendering the entire unit useless. I prefer open rear ends if they are factory just because of that. Hard driving has nothing to do with it IMHO. I think it has to do more with poor craftsmanship & previous owners failing to change out the fluids on a regular basis.
The Dude- Management
- Street Cred : 48
Re: Kerplunk...
Cross pin broke in three pieces? Once that happens, it spits the contents out like a thrashing machine.
I just threw out a bunch of broken and worn carrier assemblies. Typically the cross pin will get wear from worn spider gears (wear on gear teeth) and there will be enough slop on the gear/pin that it will bind breaking one or both gears riding on the pin.
But breaking the cross pin into three pieces isn't common. I would bet heavy wear from both spider gears on the pin and maybe the cross pin retaining bolt was broken allowing the pin to move around in the carrier.
Oh the memories...
I just threw out a bunch of broken and worn carrier assemblies. Typically the cross pin will get wear from worn spider gears (wear on gear teeth) and there will be enough slop on the gear/pin that it will bind breaking one or both gears riding on the pin.
But breaking the cross pin into three pieces isn't common. I would bet heavy wear from both spider gears on the pin and maybe the cross pin retaining bolt was broken allowing the pin to move around in the carrier.
Oh the memories...
jerry46765- Donating Member
- Street Cred : 20
Re: Kerplunk...
I'm guessing that there was a nasty crack in there somewhere, but when I bought the car, all I did was check the fluid.
I've never had one go that hard just cruising down the road, or even heard of it for that matter. I actually thought somebody had hit my car for the few seconds it took to figure out noone was anywhere near me.
I've never had one go that hard just cruising down the road, or even heard of it for that matter. I actually thought somebody had hit my car for the few seconds it took to figure out noone was anywhere near me.
Roadcaptain S3- Donating Member
- Street Cred : 26
Re: Kerplunk...
That makes me wonder about my Roadmaster.
I've seen that with governed posi's but never clutch posi's.
74chick- G3GM Member
- Street Cred : 6
Re: Kerplunk...
Impala's and 9C1's got the crappy A$$ cone type alburns none got govlocs those are only in trucks. If yours had one, it was installed from something else.
Jim_Rockford- G3GM Member
- Street Cred : 4
Re: Kerplunk...
hey guys putting my 91 caprice up for sale 700 and it has 3.08 posi 305 has a no start condition right now wifey says gotta go she wand older wagon has new pump filter and icm
interior rough leather all cracked and split
interior rough leather all cracked and split
dragons_lair59- Donating Member
- Street Cred : 11
G3GM :: Off Topic :: Close Cousins
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum
|
|
Fri May 10, 2024 5:02 pm by Matchstx
» 1973 4 door laguna frame same as 1973 2 door chevelle
Fri May 10, 2024 4:56 pm by Matchstx
» Dash assembly for 73-77 Malibu/Monte/El Camino,etc.
Fri May 10, 2024 2:48 pm by Limey SE
» Window louvers
Fri May 10, 2024 12:47 pm by JCervantes10
» 1973 Chevelle SS 1 Family
Wed May 08, 2024 8:11 am by Mitchell Murphy
» 1973 Chevelle SS, 350, 4spd. build
Wed May 08, 2024 8:09 am by Mitchell Murphy
» Who works on 73-77 "soft" steering wheels?
Tue May 07, 2024 12:46 pm by relic7680
» Blue door jamb sticker
Sun May 05, 2024 3:10 pm by Joe73
» Factory am/fm
Sun May 05, 2024 6:22 am by Joe73
» Factory am/fm
Sat May 04, 2024 11:15 pm by 77camino