Rear Sway Bar Mount
+2
Joe73
SSTOOLMAN
6 posters
G3GM :: Classifieds :: Wanted
Page 1 of 1
Rear Sway Bar Mount
Hey Guys, Does any one have the factory mounting insert/bracket that goes in to the lower rear control arms
the sway bar attaches to? I broke the bolts off one of mine while removing my sway bar. I drilled them out and retapped them but I don't think the threads are substantial enough hold. Its a 73 SS if that makes a difference.
Thanks in advance!
the sway bar attaches to? I broke the bolts off one of mine while removing my sway bar. I drilled them out and retapped them but I don't think the threads are substantial enough hold. Its a 73 SS if that makes a difference.
Thanks in advance!
SSTOOLMAN- Donating Member
- Street Cred : 7
Re: Rear Sway Bar Mount
No difference if its an SS or monte or cutlass, etc. If you broke one of the vertical bolts that hold the bar onto the insert, put a nut and lock washer on rear side. If you broke of the side bolts, Id drill it out to fit a grade 8 bolt and just tack a short sleeve in the center of the "U". That way you can crank down on the bolts.
Quick fix.
Quick fix.
Joe73- Donating Member
- Street Cred : 83
Re: Rear Sway Bar Mount
Tim I sent message on book of face LOL Ivan Toledo has a set
___________________________________________
1977 Chevelle SE x2
One Mild original
one Wild NON original
Anthony
Limey SE- Management
- Street Cred : 97
Re: Rear Sway Bar Mount
You can order that insert new. Limey knows the GM part number and how to order it
clanceman427- G3GM Enthusiast
- Street Cred : 16
Re: Rear Sway Bar Mount
clanceman427 wrote:You can order that insert new. Limey knows the GM part number and how to order it
And order the bolts with it. Ours are discontinued. The ones you can order now use metric bolts.
Joe73- Donating Member
- Street Cred : 83
Re: Rear Sway Bar Mount
clanceman427 wrote:You can order that insert new. Limey knows the GM part number and how to order it
GM PARTS DIRECT discontinued that from there site Its Unavailable I found a set for him from a Friend in Florida But with everyone being out of work the price didn't work for Him...... I even offered when I get off my crutches I would give him one that I have when I switch to my Boxed arms ( they wont use the inserts ) Said no ...So I guess he is gonna try and make his work
___________________________________________
1977 Chevelle SE x2
One Mild original
one Wild NON original
Anthony
Limey SE- Management
- Street Cred : 97
Re: Rear Sway Bar Mount
I sent him a PM. I have a set of the rear control arms complete with poly graphite bushings . I removed the set over the Christmas holidays.
I did not apply a price in the PM ...but offered sending a picture if interested.
He's has not responded.
Don't know if he just decided to go a completely different direction.
Mark
I did not apply a price in the PM ...but offered sending a picture if interested.
He's has not responded.
Don't know if he just decided to go a completely different direction.
Mark
impalamonte- G3GM Enthusiast
- Street Cred : 18
Re: Rear Sway Bar Mount
Maybe I am not sure, He may have just decided to use the ones he had also with the Bolt suggestion Like Joe73 Mentioned......
___________________________________________
1977 Chevelle SE x2
One Mild original
one Wild NON original
Anthony
Limey SE- Management
- Street Cred : 97
Re: Rear Sway Bar Mount
Or even use a cut off wheel and cut the nuts off. Then tack weld new ones on. Very easy to correct this issue.
Joe73- Donating Member
- Street Cred : 83
Re: Rear Sway Bar Mount
This may be a good opportunity to stick a set of boxed control arms on the car...which I may or may not have...ha.
brownbomber77- G3GM Member
- Street Cred : 4
Similar topics
» 1.25 front sway bar with 1.5 rear sway bar?
» Rusty's progress motor Parts arrived LOL Half are on
» Summit- Rear Sway bar
» Rusty's progress motor Parts arrived LOL Half are on
» Summit- Rear Sway bar
G3GM :: Classifieds :: Wanted
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum
|
|
Yesterday at 8:12 pm by 76Chevelle2Tone
» Rusty's progress motor Parts arrived LOL Half are on
Yesterday at 2:56 pm by Limey SE
» Painting Interior Plastic
Thu Apr 25, 2024 11:52 am by Joe73
» Anyone good at photoshop?
Wed Apr 24, 2024 9:37 pm by 76 Malibu
» El Camino/Sprint LH Aftermarket Quarter Panel FOR SALE
Wed Apr 24, 2024 5:18 am by relic7680
» 1973 chevelle four speed console
Sun Apr 21, 2024 10:32 pm by Limey SE
» dashes
Sun Apr 21, 2024 10:26 pm by Limey SE
» Used OEM Hood 73-77
Fri Apr 19, 2024 2:46 pm by 73 ss wgn
» 76 Laguna parked in 2002
Sun Apr 07, 2024 1:32 pm by Limey SE
» Thanks for having me
Wed Mar 27, 2024 7:25 pm by 77camino