on the road...
+3
clanceman427
77mali
Limey SE
7 posters
on the road...
Finally got the Elco on the road. I drove it from the hangar where I built it, to the local airport where the shop is. I have all my good tools at the airport, ( and heat !)
A friend & aircraft mechanic like me, has front-end alignment equipment there, and he is gonna do the alignment. A couple other issues to take care of also, like shifter adjustment on the linkage, and a rattle under the back end. The speedo doesn't work either.
So for the ride over there, my 6 year old grand daughter came along. She has been pestering me about when "we" are gonna take the Elco for a ride
Since she was with me, I didn't do any massive burn-outs ! ( just a couple small ones !)
A friend & aircraft mechanic like me, has front-end alignment equipment there, and he is gonna do the alignment. A couple other issues to take care of also, like shifter adjustment on the linkage, and a rattle under the back end. The speedo doesn't work either.
So for the ride over there, my 6 year old grand daughter came along. She has been pestering me about when "we" are gonna take the Elco for a ride
Since she was with me, I didn't do any massive burn-outs ! ( just a couple small ones !)
pila- Donating Member
- Street Cred : 43
Re: on the road...
Very nice ....great feeling I bet after all this hard work !!!
___________________________________________
1977 Chevelle SE x2
One Mild original
one Wild NON original
Anthony
Limey SE- Management
- Street Cred : 97
Re: on the road...
Nice work Bill!
That's gotta feel pretty good- especially the little one being excited about it
That's gotta feel pretty good- especially the little one being excited about it
77mali- Donating Member
- Street Cred : 62
Re: on the road...
Yeah, she won't likely let me alone now, wanting rides with Poppa !
pila- Donating Member
- Street Cred : 43
Re: on the road...
Congrats! What a milestone. And to share it with you're granddaughter- priceless
clanceman427- G3GM Enthusiast
- Street Cred : 16
Re: on the road...
AWESOME! Congratulations ... glad to see it has been on the road!
Cort > www.oldcarsstronghearts.com
pigValve.paceMaker.cowValve | 1979 Caprice Classic (needs new owner)
"It's the simple things in life" __ Kid Rock __ 'All Summer Long'
Cort > www.oldcarsstronghearts.com
pigValve.paceMaker.cowValve | 1979 Caprice Classic (needs new owner)
"It's the simple things in life" __ Kid Rock __ 'All Summer Long'
knightfan26917- G3GM Senior Member
- Street Cred : 8
Re: on the road...
Congratulations, Bill!
Broke the speedo on the first run, eh? Now that's impressive!
Broke the speedo on the first run, eh? Now that's impressive!
thatfnthing- Donating Member
- Street Cred : 65
Re: on the road...
This is the front side of the spare tire cover, which of course is located behind the passenger seat. It's part of the stuff I saved from the '77 I had to scrap ( sniff. )
pila- Donating Member
- Street Cred : 43
Re: on the road...
Hey thats great!! Good to finally drive it I bet!
ant7377- G3GM Addict
- Street Cred : 36
Re: on the road...
I still have to fix some odds & ends. The fast idle cam on the carb was sticking ( at 1500 !) I fixed that today. And I fooled with the right side tail pipe position.
I need to set the initial timing ( on Caddy engines the guys are running as much as 20 degrees initial ) I'm gonna swap some springs around on the mechanical advance etc.
I haven't bought a spare tire for it yet either. Exhaust note isn't a loud as I thought it would be, once it was outside !
And the drive shaft that I built didn't show any vibration at about 60+ .. Speedo isn't working. Might be on of the cables at the cruise control transducer (?)
I'm ordering a new Power Master starter for it also. It has a Chevy starter on it, which was likely installed by the previous owner of the car the engine came from. The guys on the Cadillac power forum spotted that when I posted an engine pic !
It looks the same except the main case ( & field) is shorter....
I need to set the initial timing ( on Caddy engines the guys are running as much as 20 degrees initial ) I'm gonna swap some springs around on the mechanical advance etc.
I haven't bought a spare tire for it yet either. Exhaust note isn't a loud as I thought it would be, once it was outside !
And the drive shaft that I built didn't show any vibration at about 60+ .. Speedo isn't working. Might be on of the cables at the cruise control transducer (?)
I'm ordering a new Power Master starter for it also. It has a Chevy starter on it, which was likely installed by the previous owner of the car the engine came from. The guys on the Cadillac power forum spotted that when I posted an engine pic !
It looks the same except the main case ( & field) is shorter....
pila- Donating Member
- Street Cred : 43
Re: on the road...
Carb is still acting up. Didn't run worth a dam... I removed it from the engine yesterday, and I'm going to tear it down to the last screw & re-assemble, while checking all the adjustments. A friend did this for me a couple years ago, and I'm not sure exactly what he did as far as adjustments etc. And I want to measure the rods on the power piston & see what hangers are on it...
pila- Donating Member
- Street Cred : 43
Permissions in this forum:
You cannot reply to topics in this forum
|
|
Sat May 18, 2024 1:56 pm by REVINKEVIN / Mr. 600+HP
» Pate Swap Meet - Texas Motor Speedway - G3 Parts Goldmine
Sat May 18, 2024 12:20 pm by g3chevy / Mr Pontiac
» '73 Laguna coupe - factory 454- SoCal $2500
Fri May 17, 2024 4:38 pm by Mcarlo77
» Dash Solutions
Fri May 17, 2024 3:22 pm by 76 Malibu
» Rusty's progress Done stuff again LOL
Thu May 16, 2024 12:56 pm by Limey SE
» 1973 4 door laguna frame same as 1973 2 door chevelle
Tue May 14, 2024 4:39 pm by chevelleman
» Anyone good at photoshop?
Mon May 13, 2024 12:50 pm by 76 Malibu
» '77 Monte Carlo Landau - Parting out - 61k miles on car
Fri May 10, 2024 5:02 pm by Matchstx
» Dash assembly for 73-77 Malibu/Monte/El Camino,etc.
Fri May 10, 2024 2:48 pm by Limey SE
» Window louvers
Fri May 10, 2024 12:47 pm by JCervantes10